Home · Precious Metal Brazing Machine
LZ Induction Heating Systems
Precious Metal Brazing Machine
The catalogue brazing press is a heated-plate induction station for gold, silver, copper and small non-ferrous parts. JL-120 and JL-160 run on three-phase 380 V. JL-120 is listed at 30–100 kHz with a maximum oscillating current of 1000 A and workpiece diameters about 50–130 mm. JL-160 is listed at 30–80 kHz, 1500 A, and diameters up to about 200 mm. Three-station and six-station frames are shown. Cooling water stays below 40°C. This machine is a brazing station. It is not the melting furnace on the same catalogue spread.
What to check before you enquire
- Gold, silver, copper and small non-ferrous parts.
- 30–100 kHz on JL-120, 30–80 kHz on JL-160.
- Three or six working positions.
- Separate from the gold melting furnace.
Typical applications
- Jewelry
- Gold and silver parts
- Copper parts
- Watch hardware
Catalogue models
| Model | Frequency | Oscillating current | Diameter | Cooling |
|---|---|---|---|---|
| JL-120 | 30–100 kHz | 1000 A | 50–130 mm | 0.3 MPa |
| JL-160 | 30–80 kHz | 1500 A | 50–200 mm | 0.5 MPa |
Figures are taken from the LZ catalogue. Final power, frequency and capacity depend on the metal, coil, lining, duty cycle and your mains voltage. Ask for a technical proposal before you order.
Buyers also search: induction melting furnace, medium frequency induction furnace, high frequency induction heating machine, induction brazing machine, induction hardening machine, Induktionsschmelzofen, four de fusion par induction, horno de inducción, forno a induzione, forno de indução.